Website Survey
Section 13 of 16:

Lock Install

Cut Shim

Cut Shim.jpg


Loosen and remove the screws from the mount.

Remove the shim. 

Position the shim and the mount over the top tube. You will need to cut the shim in half or a little less than half for it to fit. 

NOTE: Lock mount release button will be on the rider's left.

Re-insert screws and tighten.

Tighten the screws inside the inner part of the lock mount to make sure they are secure. 

Mount the lock.


Note: Due to the weight of the lock, the mount screws will strip and split the mount if you put it on the seat tube.  Please use the top tube to mount the lock. 





Stuck? View our FAQ 

Unboxing ⁃ Seatpost ⁃ Pedals ⁃ Handlebars ⁃ Wheels ⁃ Fenders ⁃ Disc Brake Setup ⁃ Rack ⁃ Lights ⁃ Lock ⁃ Seat Adjustment ⁃ Safety Check